What Crusher Is Used To Process 05 Stone? 05 Stone Production Line Process Flow

In the field of construction and road construction, high-quality 05 gravel (grain size usually refers to gravel below 5 mm) is an indispensable cornerstone material, and its production process tests the accuracy of the equipment and the rationality of the process flow. This article will explore in depth the ideal equipment selection and processing process flow for processing 05 gravel, as follows:

What crusher is used to process 05 gravel?

For processing 05 gravel, it is recommended to use a combination of jaw crusher, cone crusher and vibrating screen. As the main force of initial crushing, the jaw crusher can easily cope with various large pieces of raw stone with its large feed and high crushing ratio, laying the foundation for subsequent processes. Following closely is the cone crusher, which is good at fine crushing. By adjusting the crushing cavity shape and crushing force, the output particle size can be accurately controlled to ensure the consistency and purity of 05 gravel. As for the vibrating screen, it is the key to graded screening. By adjusting the mesh aperture, stones of different specifications are strictly separated to ensure that the particle size of the final product meets the standard.

The impact crusher (sand making machine) is especially recommended, which has shown extraordinary efficiency in the production of 05 stone. The equipment uses high-speed rotating hammers to continuously strike the material and double crush the stone on the stone. It can not only effectively control the fineness modulus, but also greatly improve the shape and surface quality of the stone, which is especially suitable for high-standard construction materials.

05 stone production line process

1. Raw material pretreatment: The raw stone is primary cleaned to remove surface impurities and soil to ensure the purity of the raw material and reduce subsequent wear.

2. Primary crushing: Use a jaw crusher for coarse crushing to crush large pieces of stone to a size suitable for further processing.

3. Medium and fine crushing: The cone crusher takes over and finely crushes. By adjusting the equipment parameters, the material particle size gradually approaches the target size.

4. Sand making and shaping: Enter the impact crusher for deep crushing and shape optimization, produce 05 stones that meet the specifications, and improve the stone shape through the built-in shaping cavity.

5. Screening and grading: Multi-layer vibrating screens are graded by particle size to separate qualified 05 gravel from oversized materials. The latter can be recycled back to the medium and fine crushing or sand making stage to achieve closed-loop circulation and improve resource utilization.

6. Cleaning and finished product processing: The final product is cleaned by a sand washer to remove dust and tiny impurities, improve the cleanliness of the gravel, and then dried, stored and packaged for shipment.

Highlights of Shibang gravel production line design

In the processing of 05 gravel, environmental protection and intelligence are equally important. The 05 gravel production line designed by SBM for customers adopts a closed design, equipped with dust removal and noise control systems to reduce environmental pollution. At the same time, the Internet of Things technology is integrated to implement remote monitoring and intelligent control of the production line, to grasp the equipment status and energy efficiency in real time, optimize operating parameters, reduce energy consumption, and improve overall operational efficiency.

SBM has been focusing on the production of mining machinery for 40 years. We can undertake various large, medium and small sand and gravel production line projects, including design, installation and training. As a direct seller, the equipment prices we offer are relatively favorable. If you want to know more, please feel free to consult us online at any time. Professional product managers will answer your questions online in real time.