GF Vibrating Feeder

GF Vibrating Feeder is a grizzly vibrating feeder that uses a vibrating motor as the excitation source. It is a high-efficiency primary feeder designed for mobile stations, semi-fixed stations and small material yards (generally less than 250t/h in scale, with effective silo volume less than 30m3). It is suitable for feeding jaw crushers, primary impact crushers, hammer crushers and other equipment, and can also be used for transportation.

Product Features: 4.0G of vibration strength, two-stage drop structure, higher capacity, more thorough pre-screening

Input Size: 0-700mm
Capacity: 280-450TPH
Material: Granite, marble, basalt, limestone, quartz, pebble, copper ore, iron ore and so on

Online Chat

Performance

Bigger Vibration Strength, Higher Capacity
G-force is a key index testifying the performance of vibrating machines. The bigger the vibration strength is, the higher the capacity would be. GF Vibrating Feeder adopts advanced design theories and manufacturing technologies. Its biggest vibration strength reaches 4.0G and its capacity is 20% higher than traditional TSW Feeder.
Two-stage Drop Structure Improving the Ability to Pre-screen Materials
GF Vibrating Feeder adopts a drop structure composed of two layers of grizzly bars, which can effectively screen out fine materials whose size is smaller than that of CSS (or tight-edge discharge port) because of double screenings. The removal rate of fine materials can be as high as 90%, greatly reducing the burden of primary crushers.
Taking Vibrating Motor as the Vibration Source Making Operation Stable & Convenient
GF Vibrating Feeder takes vibrating motor as the vibration source. Users can control vibration force by adjusting the vibrating motor according to actual needs. The operation is quite easy, convenient and stable.
Rubber Spring Boasting Higher Holding Capacity
Compared with traditional metal spring, the rubber spring GF Vibrating Feeder adopts owns higher holding capacity and longer service life. Besides, the whole operation is characterized by high stability, low noise and little shock to the foundation.

Working Principle

GF series vibrating feeder uses a vibration motor as the excitation source to drive the equipment to vibrate, forcing the material to be slowly pushed from the feeding end to the discharging end. At the same time, the material is screened to make its particle size more uniform. Usually, a bar screen is equipped at the discharging end of the feeder. Through it, materials with a particle size smaller than the spacing between the bars are separated, and materials with larger particle sizes are conveyed to the crusher. The feeder is installed on a support, and the support is equipped with a rubber spring to bear the vibration of the feeder. Feeding refers to conveying materials according to the required amount, and the feeding capacity of the feeder is adjusted by changing the exciting force of the vibration motor. The material can be further screened by the screen layer installed at the bottom of the feeder.

GF Vibrating Feeder

Performance

Bigger Vibration Strength, Higher Capacity

Two-stage Drop Structure Improving the Ability to Pre-screen Materials

Taking Vibrating Motor as the Vibration Source Making Operation Stable & Convenient

Rubber Spring Boasting Higher Holding Capacity

Working Principle

Solutions Just Right For You

800-1000TPH Pebble Crushing Plant

1000 t/h Limestone Crushing Plant

150-200TPH Granite Portable Crushing Plant

Leave a Message

About Us

Product Center

News & Events

Consultation